3,7

Módulo Controlador Calefacción 30A Hilitand para Impresora 3D

Name: Módulo Controlador Calefacción 30A Hilitand para Impresora 3D
Brand: Hilitand
SKU: B07DDMHGZW
Price: 41073 ARS
Availability: InStock
Rating: 3.7 (28 reviews)

1 / 9

Ver más productos marca Hilitand

Módulo Controlador Calefacción 30A Hilitand para Impresora 3D

3,7

(28 opiniones)

$41.073

+ impuestos: $8.625

Cantidad:

Compra protegida
Envío a todo el país
Garantía de entrega

Características destacadas

gran disipador de calor asegura una mejor disipación de calor
EXCELENTE RENDIMIENTO: El rendimiento del tubo MOS es excelente, la corriente máxima nominal es de 280A
TRABAJO ESTABLE A LARGO PLAZO: La corriente máxima puede ser de hasta 30A para un trabajo estable a largo plazo
NOTA: Puede ser controlado directamente por la salida de cama caliente de la placa base Ramp1.4 y serie MKS
CONTROL: Puede ser controlado digitalmente de 5V a 24V

Opiniones de compradores

3,7

28 opiniones

59%

13%

20%

MRhea

Got this for a CR10S, made it work with some effort. Need to double up a V12+ cable to both 12+ terminals on the control board. red cable on the old controller needed to go to ctrl terminal and the black to the b terminal. The PCB doesn't "fit" in the same spot but I made it work.

Alex

This isn't the same board as listed. The dimensions are the same but the silkscreen doesn't match. There are no instructions included so good luck getting it connected correctly. Making it even harder is the terminal block is too big and covers both the silkscreen AND the part of the mounting hole. I have no idea if it works since I couldn't use the mounting holes and wasn't going to risk my motherboard by connecting it incorrectly.

Michael

The media could not be loaded. Very simple device but it works well. 30A is overkill for my 12V, 10A printer but it works and that heat sink looks great! Ignore my wiring in the video... i need to print an enclosure!

Eugene

This Item won't work. IMPOSSIBLE.Impossible IF you are not the person who can desolder 2 transistors and put them back in reversed way - bottom up. They are really small: SOT23 packageThe PCB layout is wrong: base and emitter of C6 transistors are mirrored.I've got 3 of these from 2 different sellers - neither worked. I returned one, analyzed another one, revere-engineered the circuit and found it.Note: you can desolder both transistors and put back only one closer to output connectors ("6C" ...

Amazon Customer

I used this item for the heated bed on my printer as I felt the wiring for it was a bit light. This definitely helps

Descripción

Características: gran disipador de calor asegura una mejor disipación de calor. El rendimiento del tubo MOS es excelente, la corriente máxima nominal es de 280A. La corriente máxima puede ser de hasta 30A para un trabajo estable a largo plazo. Puede ser controlado directamente por la salida de cama caliente de la placa base Ramp1.4 y serie MKS. Puede ser controlado digitalmente de 5V a 24V. Cuando la potencia de la cama caliente es mayor a 150W, por favor use un módulo de alta potencia externo. Especificaciones: . Corriente: 30A Tamaño: 66.6*32mm(2.62*1.26 pulgadas) Peso: 40g(aprox.) El paquete incluye: 1 x Módulo de Control